|
* LEAD TIME: 12-17 BUSINESS DAYS
DESCRIPTION
Systor M.2 NVMe PCIe/SATA SSD/HDD duplicators are completely standalone units that can clone or sanitize a number of different media types. Easily insert and copy (or erase) M.2 or SATA solid state SSD drives or HDD hard disk drives with a single touch of a button. These duplicators consistently perform copy sessions with no speed degradation. Various copying and erasing modes help in managing different task requirements for duplicating and wiping your storage media. These high-speed, high-performance M2 copiers are the perfect solution for business (small to enterprise), education, and government entities (military, law enforcement, etc.) where copying and erasing device data needs to be accomplished with precision and minimal time.
* Duplication speed will vary depending on read/write transfer rates of master (source) and target (blank) drives.
|
FLEXIBLE CROSS INTERFACE DUPLICATION
Automatically
detect NVMe and/or SATA signals to easily copy devices
from one interface to another, such as:
- M.2 (SATA) to M.2 (NVMe)
- M.2 (NVMe) to HDD/SSD (SATA)
- HDD/SSD (SATA) to M.2 (NVMe)
- HDD/SSD (SATA) to HDD/SSD (SATA)
|
|
|
|
|
|
SUPPORTED
DEVICES
- NVMe M.2
- SATA M.2
- SATA 3.5" HDD
- SATA 2.5" HDD
- SATA 2.5" SSD
|
|
|
|
|
|
|
NVME SIZE COMPATIBILITY
Compatible with all sizes of:
- NVME M.2 SSD (Types 2230, 2242, 2260, 2280, 22110)
- PCIe SSD (full and low profiles)
|
|
|
INTELLIGENT DUPLICATION
(COPY MODES)
|
|
|
|
Systems and Files
(Quick Copy Mode):
Copies only the data area and skips empty space, reducing
the copy duration time.
|
|
All Partitions:
Can be set to copy or skip HPA, DCO, unknown partitions,
modified formats, etc.
|
|
|
|
|
Whole Media:
Copies from the initial sector to the end, bit-by-bit. There
are no format limitations in this mode. Supports all systems
and proprietary formats, along with various brands.
|
|
Percentage Copy:
Set a selected percentage of source/master capacity to copy.
|
SKIP BAD SECTORS
Select the numbers of bad sectors to skip from the source
drive (ranging from 0 to unlimited) during copy, compare, or erase
functions.
SANITIZATION METHODS
(ERASE MODES)
|
|
|
|
Quick
Erase:
Erases the device's index table, and only takes a few
seconds to complete.
|
|
Full
Erase:
Erases the entire device
|
|
|
|
|
DoD
Erase:
Complies with the erasure standards of the U.S. Department
of Defense
(DoD) 5220.22-M.
|
|
Secure
Erase:
Complies with standards of the National Institute of
Standards and Technology
(NIST) 800-88.
|
COMPARE FUNCTION + CRC CHECKSUM
Performs bit-by-bit cyclic redundancy check (CRC) to ensure copies are identical for every duplication session.
OVERVIEW
EASY OPERATION
SMART LED INDICATORS
SPECIFICATIONS
PRODUCT FEATURES
|
|
Features
|
Descriptions
|
Operation Type
|
- Stand-alone, FPGA-based design (no PC required)
|
| Controller Design |
- Embedded controller is designed to support capacities
over 18TB+.
- Constant improvement supports latest market-available
devices.
|
Devices Supported
|
- Automatically detect NVMe and/or SATA signals to
easily copy devices from one interface to another, such
as:
- M.2 (SATA) to M.2 (NVMe)
- M.2 (NVMe) to HDD/SSD (SATA)
- HDD/SSD (SATA) to M.2 (NVMe)
- HDD/SSD (SATA) to HDD/SSD (SATA)
|
Hot Swap Supported
|
- Supports hot swapping of devices.
|
Bandwidth Performance
|
- Peak transfer speeds up to 9GB/min. (150MB/sec.)
- Actual performance is dependent on media transfer
speeds.
- Dedicated bandwidth enables high-volume replications
without speed degradation.
|
Read-Only Or Eraseable Source Port
|
- Built-in feature. Enables/disables source media to be
erased/sanitized during erase process.
|
Modular Port Design
|
- Replace ports easily to reduce downtime and for
cost-effective long-term usage.
|
PRODUCT FUNCTIONS
|
|
Features
|
Descriptions
|
Copy Modes
|
- System and Files (Quick Copy Mode):
Copies data and skips empty space. Only supports
Windows, Mac, and Linux.
- All Partitions:
Set to copy or skip HPA, DCO, unknown partitions,
modified formats, etc.
- Whole Media:
Copies from the initial sector to the end, bit-by-bit.
No format limitations. Supports all systems and
proprietary formats, along with various brands.
- Percentage Copy:
Set a selected percentage of source/master capacity to
copy.
|
Compare (Verification)
|
- Performs bit-by-bit cyclic redundancy check (CRC) to ensure copies are identical for every duplication session.
|
Sanitization Modes
|
- Quick Erase:
Erases device index table.
- Full Erase:
Erases entire device(s), in compliance with the NIST
800-88 standard.
- DoD 3-Pass:
Erases entire device(s), in compliance with the DoD
5220.22-M standard.
- DoD 3-Pass + Compare:
Erases entire device(s) and verifies complete erasure,
in compliance with the DoD 5220.22-M standard.
- DoD 7-Pass:
Erases entire device(s) 7 times, in compliance with the
DoD 5220.22-M standard.
- Secure Erase:
Erases non-loadable areas, in compliance with the NIST
800-88 standard.
- Enhanced Secure Erase:
Erases devices that support this feature.
|
Skip Bad Sectors
|
- Set number of bad sectors to skip during
Copy/Compare/Erase.
|
PRODUCT COMPATIBILITIES
|
|
Compatibilities
|
Descriptions
|
Compatible Devices
|
- NGFF (M.2): 2230, 2242, 2260, 2280, 3030, 3042, 3060,
and 3080.
- Supports B+M Key or M Key only
- SATA HDD/SSD
|
Supported Formats
|
- Quick Copy Function: FAT16/32/64, Windows (NTFS),
Linux (Ext2/Ext3/Ext4), and Mac (HFS, HFS+, HFSX).
- Whole Device Copy Function: All Formats, including
proprietary formats.
- GPT, MBR, and Advanced Formats.
|
Supported O/S
|
- All (Windows, Mac, Linux, and other proprietary
systems).
|
PRODUCT SPECIFICATIONS
|
|
Specifications
|
Descriptions
|
LCD Display
|
- 2 x 20 Backlit Monochrome LCD Display
|
LEDs
|
- 3 LED Indicators per Port:
- Yellow (Power), Green (Pass), and Red (Fail)
|
Control Panel
|
- 4 Push Buttons (▲, ▼, OK, ESC)
|
Power Requirements
|
|
Operational Temperature
|
- 5°C ~ 45°C (41°F ~ 113°F)
|
Non-operational Temperature
|
- -20°C ~ 85°C (-4°F ~ 185°F)
|
Humidity
|
- Operating: 20% ~ 80%, non-condensing
- Non-operating: 5% ~ 95%, non-condensing
|
Packaging Dimensions (L×W×H)
|
|
Product Weight
|
|
Certifications
|
|
* Specifications are subject to change without notice.
|
